Table of Contents
Advertisement
The page of basic parameter is described as follow:
Local host name: client side or system name displayed by CMS
Local host number: it is used when multiple DVRs are controlled by a remote control
Enable remote control: aim the remote control at the DVR to be controlled, press DVE, input device
number, and then press ENTER. The local host number is 0 by default; the remote control can directly
control the DVR
Close remote control: aim the remote control at the DVR to be controlled, press DVE, input device
number, and then press ENTER, then the DVR will not be controlled by the remote control.
System: two modes: PAL and NTSC. User can select himself according to video recorder.
Language: support multiple languages
Resolution: set the resolution of display
Primary device: set menu output to switch between VGA and CVBS.
Date: set the year-month-day of system
Time: set the hour-minute-second of system
The page of user management is described as follow:
Type: except that admin is administrator, others are ordinary users
Add: add new user name, password and authority as shown below
Page 25 of 49
Advertisement
Table of Contents
