Table of Contents
Advertisement
Prompt: after Search is clicked, if the device exists, then it will be shown in zone 1, single click mouse
and drag or single click to select the channel to be added, right click mouse to add device, then
channels added successfully will be shown in zone 2, right click mouse on zone 2 to switch bit stream,
delete selected channel.
If it is required to add new group, click New group, then add network channel; after such add is
completed, click Save group, and exit.
4.4.9 Working hard disk
Click
to enter into Browse computer dialog box, as shown below:
Prompt: working hard disk means the path position to save record file, backup file, snapshot file.
4.4.10 Group management switch
Click
to enter into fast switching network group, as shown below:
4.4.11 Preview channel setting
Click
to open or close the preview of corresponding channel, as shown below:
Page 37 of 49
Advertisement
Table of Contents
