Use and Functioning
Datalogic Firmware Utility
The Datalogic devices are equipped with a field upgradeable firmware
mechanism.
Firmware updates are available on the Datalogic website:
http://www.datalogic.com/eng/support-services/automatic-datac
apture/downloads/software-utilities-sw-2.html.
After you have downloaded the desired update, there are several
ways you can update the firmware on your device.
•
Use Wavelink Avalanche™ if you have multiple Datalogic
devices to update. For more information refer to the dedicated
section of the Wavelink website.
•
If Wavelink Avalanche™ is not available or you have only a few
Datalogic devices to update, use the Datalogic Firmware Utility
(DFU), described below, to install or update the firmware using
an ActiveSync connection.
The following sections provide procedures for the retrieval and
installation of the most current firmware image onto a Datalogic
device.
Retrieving a Firmware Image Update
The following instructions use Internet Explorer to retrieve the most
current firmware image.
1. Launch Internet Explorer on your PC and navigate to the
Datalogic website.
2. Navigate to the Downloads section of the website.
3. Using the device selection fields, select the file you want to
download, then click Save to begin copying the files to your local
machine (or local network location).
66
JOYA™ TOUCH