Auto Exposure Bracketing (Aeb Mode) - Canon PowerShot G2 User Manual

Auto Exposure Bracketing (AEB Mode)

In this mode, the camera automatically changes the exposure within a set range to
take three shots after you press the shutter button once. You can adjust AEB settings
in 1/3EV steps within the range of -2EV to +2EV of the standard exposure setting.
AEB settings can be combined with exposure compensation settings (p. 69) to extend
the adjustment range. The images are shot in the following order: Standard
exposure, underexposure and overexposure.
• The AEB mode cannot be used for flash photography. If the flash fires, only one
image gets recorded.
• This function can only be selected in the ,
• The selected AEB setting will be memorized even when the camera's power is
turned off.
Press the
1
times.
• The icon and the exposure compensation bar
will appear in the display panel. The exposure
compensation bar will also appear in the LCD
monitor if it is on.
Press the
2
selector to expand or contract the
range.
• The arrow expands the range, the
contracts it.
Press the
3
• You can also take the picture with the set
exposure compensation value by pressing the
shutter button without pressing the
button.
• To cancel the AEB setting, reset it to .
Shoot the image.
4
• If you pressed the shutter button at Step 3,
the icon and the exposure compensation bar
will reappear after the shot, allowing you to
change the setting for the next shot.
Shooting - Selecting Particular Effects
button three
or arrow on the omni
button.
and shooting modes.
arrow
73