Installing From The Arcsoft Camera Suite Cd-Rom; Installing From The Adobe Photoshop Le Cd-Rom - Canon PowerShot G2 User Manual

5.
Select the programs you wish to install and click the [Next] button.
A check mark
• With Windows Me/XP, [Digital Camera USB WIA Driver] will appear in
place of [Digital Camera USB TWAIN Driver].
6.
Confirm the program selection and click the [Next] button.
• The installation will start.
• Follow the onscreen messages to proceed with the installation.
7.
After the installation is complete and the installer panel displays again,
click the [Exit] button.
• Remove the Canon Digital Camera Solution Disk once the installation is
complete so that the proper driver may be installed.
• Continue with the procedures on page 23 to install the driver software
to allow the camera to be connected to a computer via the USB
interface and download images.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Installing from the ArcSoft Camera Suite CD-ROM

To install ArcSoft PhotoImpression or VideoImpression, place the ArcSoft Camera
Suite CD-ROM into the drive and double-click the [My Computer] icon on the
desktop followed by the [ArcSoft] folder and [Setup.exe] icon. Follow the on-screen
instructions to install ArcSoft PhotoImpression/VideoImpression.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Installing from the Adobe Photoshop LE CD-ROM

To install Adobe Photoshop LE, place the Adobe Photoshop LE CD-ROM in the drive
and double-click the [My Computer], [Photosle], [English], and [Photosle] folders,
followed by the [Setup.exe] file. Follow the on-screen instructions to continue with
the installation.
You must input the software serial number to install Adobe Photoshop LE.
It can be found on the CD-ROM case.
should appear beside the programs that will be installed.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
21