Canon PowerShot G2 User Manual page 182

26
Windows XP
• Users of Windows XP Professional must first log in as an Administrator
to install programs.
1.
Attach the supplied USB cable to the computer's USB port and the
camera's Digital Terminal, and set the camera to Replay mode.
For USB interface connection instructions, see "Connecting to a USB port"
(p. 16).
The [Found New Hardware Wizard] dialog will appear after a few moments
and automatically install the USB WIA Driver.
Once the installation is complete, the ZoomBrowser start-up event dialog and the
Scanners and Cameras Wizard start-up event dialog will both display. Click [OK] in
the event dialog of the application you wish to start (ZoomBrowser EX or Scanners
and Cameras Wizard). The event will start.
When you use Windows XP, please set your computer to automatically start an event
when the camera is connected to the computer. Be sure to set the computer to start
either ZoomBrowser EX or the Scanners and Cameras Wizard (p. 27). If neither of
these is selected the computer will not operate properly.