Auto Exposure Bracketing (Aeb Mode) - Canon PowerShot SX40 HS Getting Started

Auto Exposure Bracketing (AEB Mode)

The camera takes 3 continuous shots while automatically adjusting the
exposure to standard exposure, underexposure and overexposure, in that
order.
AEB is only available in ! (p. 26).
•
• Continuous shooting (p. 83) cannot be used in this mode.
If you press the l button while in the exposure compensation screen
•
(p. 78), the compensation amount setting screen will appear.
Even if you set the number of shots in $ (p. 54), only 3 shots will be
•
taken.
Auto Exposure Bracketing (AEB Mode)
If you release your finger from the shutter
button and press the o button again,
will disappear and FE will unlock.
Compose the scene and shoot.
When you shoot one image,
disappear and FE will unlock.
Choose .
After pressing the m button, press the
op buttons to choose
qr buttons or turn the 5 dial to choose
.
Set the exposure compensation
amount.
Press the l button.
Press the qr buttons or turn the 5 dial to
adjust the setting.
From the exposure set by the camera, you
can adjust the amount of compensation
from –2 to +2 stops in 1/3-stop increments.
If exposure compensation (p. 78) is
already being used, settings are made with
the compensated value as the base.
will
, then press the
97