Installing The Battery Pack - Canon PowerShot G2 User Manual

Installing the Battery Pack

Install Battery Pack BP-511 (supplied) into the camera as follows. Use a household
power source to power the camera for extended periods (p. 20).
Terminals
• Charge the battery pack before using it the first time (p. 16).
• The flashing green indicator signals that the CF card is being written to, read, or
erased, or that data is being sent to the computer. Never open the battery cover or
remove the battery while it is flashing.
• Remove the battery pack when the camera is not in use.
Battery Status Symbols
• The following icons indicate the battery status. These icons will not appear while
the camera is plugged into a household power source.
(Steady):
(Flashing): Low battery
(Flashing): Replace or recharge battery
18
Preparing the Camera
1 Turn the main dial to
Slide the battery cover lock in the
2
direction of the arrow and open the
battery cover.
Insert the battery pack as shown.
3
Close the battery cover.
4
Sufficient battery charge
.