Storage; Memory; Trigger - ETS 1 Operation Manual

Ets box ip camera series operation guide
Hide thumbs Also See for 1:
Table of Contents

Advertisement

3.6 Storage

3.6.1 Memory

In "Memory", you can check the remaining capacity for recording, or clear all recorded data saved if needed.
Note: The recorded data will be removed also when you reset or reboot this camera.
For models without a micro SD cart slot, you can only record a limited number of recordings.
For models with a micro SD cart slot, you could insert a compatible micro SD card for more video recording.
Note: To know how and where to insert a micro SD card, please refer to "1.7 Insert a Micro SD Card
(For Model 2, 3 & 4 Only)" at page 3.
To know the compatible list of micro SD cards, please refer to "APPENDIX 5 MICRO SD CARD
COMPATIBLE LIST" at page 34.
Note: To save more recorded data, it's recommended to use this camera with the compatible NVR.
Note: To know the total recording time per recording resolution, please refer to "APPENDIX 4
RECORDING TIME TABLE" at page 33.

3.7 Trigger

3.7.1 Trigger
You can configure how this camera reacts when there's an alarm or a motion event.
Note: Audio Alert is available only when the camera supports audio recording.
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

234Box ip camera series

Table of Contents