Appendix 4 Recording Time Table - ETS 1 Operation Manual

APPENDIX 4 RECORDING TIME TABLE

Below shows the estimated total recording time for each recording resolution.
The recording time per resolution is the average value collected from the both alarm trigger conditions indicated in
"Testing Environment", and is for reference only.
The time may vary depending on the resolution, image quality & frame rate you choose, the complexity of your
monitoring area, and how often the moving objects show in your monitoring area.
Testing Environment
 Place: Office
 Monitoring area: 1.5 meters away from the camera
 Alarm trigger conditions:
(1) One person walks by the monitoring area and leaves immediately.
(2) Two persons walk by the monitoring area. One goes away immediately, and the other one stays a while and
goes away.
Recording Resolution
Recording time (second)
SXGA VGA
25 115
33
QVGA
211