Recording With The Timer - Sharp VC-A210X Operation Manual

Recording with the Timer
The timer can be set manually for automatic recording of up to 8 events over a 365 day period.
PREPARATION
l
Load the cassette, ensuring the erasure protection hole is covered. The VCR power will automaticall!
turn on.
*Check that the clock is displaying the correct time. (See Setting the Clock on page 9.)
PROCEDURE
Example: Recording channel position 47 from 12:OO PM to 12:30 PM, December 15, 1997, if the
present time is IO:28 (morning), December 14, 1996.
[Menu]
[Timer position]
-When the clock is
set to 24H mode,
$I_.__"
wil appear.
Numeric
buttons
or
[Date]
112
DITE PR START STOP
m _- _:___ _:___
i
__,__ __ _:___ _:___
__,__ __ _:___ _:___
i
__,__ __ _:___ _:___
I
'
b
[Once]
*.
[Daily/Weekly]
' A/VI).
Numeric /
[Channel]
buttons
f
112 1
or
DATE PR START STOP
15,12 m -_:--_-_ -:--_
Numeric
buttons
or
AW
When the
clock is set to
24H mode,
DATE
PR
"AM/PM" will
15/12 47
__,__ __ __:-_-_ -:__-_
not appear.
I mm,__ __ __:_-__ _:_-__
--,__ -- -:_-_ _:___
b
0 Press the MENU button.
Select the TIMER-setting mode and press the
SET button.
@ Select the timer position with the A/V buttons
and press the SET button.
l
If the timer positions
1
to
4
have already been
set, the screen changes to 2/2 (timer positions
5 to 8).
*This screen can be selected directly by using
the TIMER button on the Remote Control.
@ Set the date for timer recording with the numeric
or A/V buttons on the remote control and then
press the F button.
l
First set the 'day' digits and then 'month'. If there is
only one 'day' or one 'month' digit, enter a 0 first.
0
A
If you want to record only once, press the b
button and go to step 0. Otherwise, select
"D
(DAILY)" to record at the same time each day or
"W (WEEKLY)" to record at the same time each
week by pressing the A or v button, and then
pressing the b button.
@ Set the channel number using the numeric or A /
v buttons and then press the b button.
l
To
record audio and video from an external source
through an
AUDIO/VIDEO terminal on the VCR, press
the A/'I buttons to select an AV channel. (When an
AV position is selected, "AV" is displayed where a
channel position number is usually displayed.)
@ Set the start time with the numeric buttons or A
/
V
buttons and press the F button.
Continued on next page
l
The A / v buttons can also be used to set the date and time instead of the numeric buttons.
l
Press 0 first if the day, month, hour or minute is a single digit.
20