Camera Settings; Camera Configuration - QNAP NVR-101 User Manual

5.6

Camera Settings

You can configure network camera, recording, schedule, alarm, and advanced
settings.
5.6.1

Camera Configuration

Please follow the steps below to configure the network cameras.
1. Select a camera number (1, 2, 3, and 4).
2. Select a camera model.
3. Enter the camera name.
4. Enter the IP address or domain name of the camera.
5. Enter the user name and password to login the camera.
6. Enable recording on the camera.
7. Click Apply to save the settings.
Note:
1. For detailed supported camera list, please refer to
2. All the settings will not take effect until you click Apply button. When
applying changes, recording operation will stop for a while (maximum 1 minute)
and then restart.
Appendix
64
E.