Display (Menu À Settings À Display); Maintenance (Menu À Settings À Maintenance) - ACN Iris X User Manual

Time Settings
In Manual (YY-MM-DD), users can press on the blank field and edit the time then press Apply. Press the
Save button after finishing the settings. Then the time will display at the right corner of the top status bar in
the screen as configured.
Note: the time zone selected in this menu is independent of the time zone selected in the World Clock widget.
Display (MENU à Settings à Display)
The Display menu is available in Settings. Users can adjust the screen Backlight brightness in display
settings. By pressing the left/right hand side of the cursor on the brightness bar, users can turn down/up the
brightness strength from 1 to 10 (Default value). Press Save after configuration.
Users can also change the font size to Large, Normal (default) or Small.
Display Settings
Maintenance (MENU à Settings à Maintenance)
There are four tabs for users' selection on the Maintenance setting screen under MENU à System Settings
à Maintenance: Reboot, Backup, Factory Functions, and Debug.
The Reboot page has the options of rebooting the device or performing a factory reset. A reboot will
simply power cycle the device. A factory reset will erase all settings and reload the ACN configurations
and settings.
29