Download Print this page
Patton BODi rS BD007 Series Quick Start Manual

Patton BODi rS BD007 Series Quick Start Manual

Bandwidth-on-demand internet router with reliability and survivability

Advertisement

Quick Links

B.2 Radio and TV Interference
The BODi rS router generates and uses radio frequency energy, and if not installed and used properly-that is, in
strict accordance with the manufacturer's instructions-may cause interference to radio and television reception.
The BODi rS router have been tested and found to comply with the limits for a Class A computing device in accor-
dance with specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protec-
tion from such interference in a commercial installation. However, there is no guarantee that interference will
not occur in a particular installation. If the BODi rS router does cause interference to radio or television recep-
tion, which can be determined by disconnecting the unit, the user is encouraged to try to correct the interference
by one or more of the following measures: moving the computing equipment away from the receiver, re-orient-
ing the receiving antenna and/or plugging the receiving equipment into a different AC outlet (such that the com-
puting equipment and receiver are on different branches).
B.3 CE Declaration of Conformity
Patton Electronics, Inc declares that this device is in compliance with the essential requirements and other rele-
vant provisions of Directive 2004/108/EC relating to electromagnetic compatibility and Directive 2006/95/EC
relating to electrical equipment designed for use within certain voltage limits. The Declaration of Conformity
may be obtained from Patton Electronics, Inc at www.patton.com/certifications.
The safety advice in the documentation accompanying this device shall be obeyed. The conformity to the above
directive is indicated by CE mark on the device.
B.4 Authorized European Representative
D R M Green, European Compliance Services Limited.
Avalon House, Marcham Road, Abingdon,
Oxon OX14 1UD, UK
Copyright statement
Copyright © 2012, Patton Electronics Company. All rights reserved.
The information in this document is subject to change without notice. Patton Electronics assumes no
liability for errors that may appear in this document.
Trademarks statement
The term BODi rS is a trademark of Patton Electronics Company. All other trademarks presented in this document
are the property of their respective owners.
Warranty, Trademark, & Compliance Information
For warranty, trademark and compliance information, refer to the user manual for your BODi rS model, avail-
able online at www.patton.com/manuals.
BODi rS BD007 Series
Bandwidth-on-Demand Internet Router
with Reliability and Survivability

Quick Start Guide

For more information or to place an order call
(800) 362-3770
This is a Class B device and is not intended for use in a residential environment.

Advertisement

loading

Summary of Contents for Patton BODi rS BD007 Series

  • Page 1: Quick Start Guide

    This is a Class B device and is not intended for use in a residential environment. Trademarks statement The term BODi rS is a trademark of Patton Electronics Company. All other trademarks presented in this document are the property of their respective owners.
  • Page 2 • Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power Refer to the following manual (available online at www.patton.com/manuals) for detailed information adapter, line voltages are present within the device when the power...
  • Page 3: Powering Up The Router

    Chapter 3 in the BODi rS BD007 and BD004 User Placing or mounting the BD007. Manual: (www.patton.com/manuals/BD007_BD004.pdf). Connecting a computer to the LAN port on the BD007. Connecting devices to the WAN ports on the BD007.
  • Page 4 (Antennas) (Antennas) Figure 2. BODi rS interfaces Refer to Chapter 3 in the BODi rS BD007 and BD004 User Manual (www.patton.com/manuals/ Note BD007_BD004.pdf) for information about configuring WAN interfaces via the Web Admin interface. Figure 1. Mounting BODi rS in a rack 3.1 Connecting the Ethernet Interfaces...