EAX-Q67 User's Manual
1.8.4 ATX power connectors (EATXPWR1)
The connector is for ATX power supply plugs. The power supply plugs are designed to fit
these connectors in only one orientation. Find the proper orientation and push down firmly
until the connectors completely fit.
1.8.5 Serial Port connectors (COM3, COM4, COM5, COM6)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
36 EAX-Q67 User's Manual
Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system. See the table below for details.
EATXPWR1
ATX12V1
COM3 , COM4 , COM5 , COM6