AVENGER Technical Manual (07610-003-34-01I)
HTS-11 (SCALE PREVENTION & CORROSION CONTROL DEVICE)
Kleenware HTS-11 System
04730-003-28-03
The HTS-11 Must be installed vertically. The provided
bracket is to be secured to the wall. Observe proper
inlet/outlet water directions. Flow directions are molded
into the top of the head. Line pressure should be
released prior to changing cartridges. De-liming of
equipment prior to installation is recommended but not
required.
Page Created: 04-08-2011
Revised: 03-11-2013
53
Replacement Cartridge
(Inspect at least every 6 months)
04730-003-28-04
Replacement Test Strip
06401-003-28-06