Jackson Avenger HT Installation/Operation & Technical Manual page 20

DETERGENT CONTROL (CONTINUED):
Some dish machines come equipped with integral solid detergent dispensers. These dispensers are de-
signed to accommodate detergents in a certain sized container. If you have such a unit, remember to explain
this to your chemical distributor upon first contacting them.
As explained before, water temperature is an important factor in ensuring that your dish machine func-
tions properly. The data plate located on each unit details what the minimum temperatures must be for ei-
ther the incoming water supply, the wash tank and the rinse tank, depending on what model of dish machine
you have installed. These temperatures may also be followed by temperatures that Jackson recommends to
ensure the highest performance from you dish machine. However, if the minimum requirements are not
met, the chances are your dishes will not be clean or sanitized. Remember, a dish can look clean, but it may
not be sanitized. Instruct your dish machine operators to observe the required temperatures and to report
when they fall below the minimum allowed. A loss of temperature can indicate a much larger problem such
as a failed heater or it could also indicate that the hot water heater for your operation is not up to capacity
and a larger one may need to be installed.
There are several factors to consider when installing your dish machine to ensure that you get the best
possible results from itand that it operates at peak efficiency for many years. Discuss your concerns with
your local chemical distributor and water treatment specialist before there is a problem.
AVENGER Technical Manual (07610-003-34-01I)
INSTALLATION INSTRUCTIONS (CONTINUED)
Page Created: 03-28-2011
Revised: 03-11-2013
20