Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods
Sample implementations
104
Sample 2
To set the tablet to the following configuration:
Default digitizer input control is Auto Sense.
■
The user can temporarily change the digitizer input control
■
settings.
The user can change the default digitizer input control settings.
■
Configure settings as follows:
Do not use the BIOS Setup Utility to set a Supervisor password.
1.
Use the Panel Control Center to set one of the P keys to Digitizer
2.
Selection.
Use the Add new user function to create a user account.
3.
Note: If the user already exists, the setting the administrator has
set replicates to all the users of the computer.
3
iX104C
User's Handbook