Using The Pen - Xplore iX104C3 User Handbook Manual

Chapter 2. Using the iX104C3

Using the pen

Using the pen
For more information about
Dual Mode tablet input
methods, see Appendix F,
"Configuring Dual Mode
Tablet Digitizer Input
Methods."
32
You can use the pen to select items and to navigate through programs.
If your computer is an iX104C
Use the special multi-function pen provided with the
computer.
If your computer is an iX104C
You can use any of the following input methods:
Auto-Sense mode: Use either the multi-function pen or your
finger interchangeably. The computer distinguishes between
the two input modes and automatically adjusts accordingly.
This is the tablet's default state.
Active mode: Use only the special multi-function pen
provided with the computer.
Touch mode: Use your finger or another similar pointing
device.
For more information, see "Selecting Auto-Sense, Active, or
Touch mode" on page 33.
WARNING
Do not use items such as a ball point pen or a screwdriver that can
damage the tablet. Damage caused by using an item not provided with
the tablet is not covered by the tablet warranty.
Note: Before you use the tablet the first time, or if the action
you are trying to perform does not occur when you use the pen
or your finger to touch the screen, calibrate the digitizer as
described in "Calibrating the digitizer" on page 71.
3
Tablet PC:
3
Dual Mode:
3
iX104C User's Handbook