Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods
Using the BIOS Setup Utility to set input method defaults
94
Selecting the digitizer input method
Select the Startup Configuration tab.
1.
In the
2.
Digitizer Selection
drop-down list as follows:
Value
Auto
Touch Only
Digitizer Only
field, select the value from the
Description
Enables automatic sensing (Auto Sense) of inputs
from touch and from the active pen.
Note: This is the default setting.
Enables touch input only. Active digitizer, pen
inputs, and Auto Sense are all disabled.
Enables inputs from the active pen only. Touch
input and Auto Sense are disabled.
Digitizer Selection
field
3
iX104C
User's Handbook