Setting Digitizer Input Method Security - Xplore iX104C3 User Handbook Manual

3
iX104C User's Handbook
Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods
Using the BIOS Setup Utility to set input method defaults

Setting digitizer input method security

Follow these steps to specify whether the tablet user can change the
digitizer input method settings:
In the BIOS Setup Utility, select the
1.
In the
2. Password Setting
list as follows:
Value
No passwords set
Supervisor
password set only
User password set
Click .
3. OK
Reboot the computer.
4.
Password
field, select a value from the drop-down
Description
Anyone can change the
digitizer input settings.
A supervisor password
must be entered in order
to change the input
settings.
The user cannot change
the input settings.
tab.
Notes
This setting is not
controlled by Windows
User groups.
The supervisor
password must be
entered before the BIOS
Setup Utility will open.
Only the supervisor can
change the input
settings.
95