Sample Implementations; Sample 1; Sample 2 - Xplore iX104C5 User Handbook Manual

Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods

Sample implementations

Sample implementations
126
This section provides settings for two sample configurations. See
"Using the BIOS Setup Utility to set input method defaults" on
page 116 and "Using the Panel Control Center to configure temporary
changes to the input method" on page 119 for information about how
to make the settings.

Sample 1

To set the tablet to the following configuration:
Default digitizer input control is Touch only.
■
The user can turn off the touch screen.
■
The user cannot change any digitizer input control settings.
■
Configure settings as follows:
1.
Use the BIOS Setup Utility to set a Supervisor password. (This
protects the digitizer selection and all other BIOS Setup Utility
controls.)
In Windows Administrator mode, use the Panel Control Center to
2.
set one of the P keys to Touch Panel Toggle.
Use the Add new user function to create a user account.
3.
Note: If the user already exists, the setting the administrator has
set replicates to all the users of the computer.

Sample 2

To set the tablet to the following configuration:
Default digitizer input control is Auto Sense.
■
iX104C5 User's Handbook