Accessing The Pcmcia Compartment - Xplore iX104C3 User Handbook Manual

Chapter 2. Using the iX104C3

Accessing the PCMCIA compartment

Accessing the PCMCIA compartment
54
When you install a PCMCIA card, follow the instructions in this
section to access the PCMCIA compartment.
WARNING Failure to follow this procedure can result in
damage to the case and the cover, which is not
covered under the Xplore Technologies warranty.
Turn off the computer.
1.
Remove all power from the unit, including batteries and other
2.
power sources such as power supplies, cigarette lighter adapters,
and mobile power sources.
Remove the battery. (See "Removing and installing the battery"
3.
on page 45.)
Use an M1 Philips screwdriver to remove the 6 screws from the
4.
compartment cover. (Do not use a power screwdriver.)
6 screws
3
iX104C User's Handbook