Table of Contents
Advertisement
•
The above display appears when Narrow is
selected.
Note: You cannot use the [ ] key for this configuration.
12.2.1.11 Scan Add
•
You can add channels to the Scan list.
•
You can delete channels from the Scan list.
Note: You cannot use the [ ] key for this configuration.
12.2.1.12
Priority Channel
You can program a channel as the Priority Channel.
•
The above display appears when the selected
Channel is programmed as the Priority Channel.
•
The above display appears when the selected
Channel is not programmed as the Priority
Channel.
Note: You cannot use the [ ] key for this configuration.
12.2.1.13
PTT ID
This function allows you to select whether or not to
use the PTT ID.
•
The transceiver does not use the PTT ID.
•
The transceiver uses BOT.
•
The transceiver uses EOT.
•
The transceiver uses both BOT and EOT.
Note: You cannot use the [ ] key for this configuration.
12.2.1.14
Scrambler
This function allows you to select whether or not to
use the Scrambler Board.
•
The transceiver does not use Scrambler.
•
The transceiver uses Scrambler.
Note: You cannot use the [ ] key for this configuration.
12.2.1.15
Scrambler Code
12 Self Proguamming Mode
37
Advertisement
Table of Contents
