Add To Scan / Delete From Scan; Priority Scan; Group Scan; Roup Can (Tk-3173 Only ) - Kenwood TK-3173K4 Instruction Manual

A S
DD TO CAN
Press the key programmed as Scan Delete/Add, to add or
remove each channel/ group ID to or from the scan sequence.
• The channel/ group ID add indicator (
the display when the selected channel/ group ID is added to the
scan sequence.
Press and hold the key programmed as Scan Delete/Add, to
add or remove each zone to or from the scan sequence.
• The zone add indicator (
when the selected zone is added to the scan sequence.
P S
RIORITY CAN
The Priority channel must be programmed in order for Priority
Scan to function.
The transceiver will automatically change to the Priority
channel when a signal is received on it, even if a signal is
being received on a normal channel.
• The indicator appears on the display when the selected
channel is the Priority channel.
Note: Priority cannot be programmed onto the group ID of a
Trunking zone; it can be used only on channels of Conventional
zones.
G S
ROUP CAN
Group Scan is useful when more than one group ID is
programmed in a zone. Group Scan is set by your dealer on
request. It scans the revert groups as well as groups that are
allowed to be scanned.
When a call is received, the group indicator shows the group
ID, and that group becomes the revert group. Simply press
the PTT switch to respond to the call.
/ D
ELETE FROM
(TK-3173 O
S
CAN
) will appear on the display
)
NLY
) will appear on
25