Changing Tank Water - First Degree Fitness Neptune Challenge AR Owner's Manual

Neptune challenge ar rower
Hide thumbs Also See for Neptune Challenge AR:
Table of Contents

Advertisement

To Change Tank Water
Set Adjuster handle to
"MIN"
Removing/Changing Tank Water:
1. Set Adjuster handle to "MIN"
2. Row at least ten strokes to fill the storage reservoir as completely as possible.
3. Remove Tank Plug.
4. Insert rigid end of siphon into the tank, and flexible hose into a large bucket.
5. Drain tank (approx. 40% of water will remain) and then refill following directions for Tank filling as
described in the Tank Filling section of this manual.
Note: The valve on top of the siphon must be closed to allow proper drainage.
Note: Water treatment will preclude the need to change tank water if the treatment schedule is
maintained. Additional chlorine is required only when discoloration appears in the water.
Note: Exposure to sunlight affects the water. Moving the rower away from direct sunlight and add-
ing the blue dye will extend time between water treatments.
10
Row a minimum of ten complete strokes before com-
mencing tank draining. Remove tank plug, insert rigid
end of siphon into tank and begin draining.
NOTE: Approximately 40% of tank water will remain. It
is not possible to completely drain the A/R tank without
disassembly.
Rigid end of Siphon
in tank

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Neptune Challenge AR and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents