Leckey Comfee Seat User Instructions page 8

Fitting
the
Cushions
8
8.1 Fitting the Head
Support Cushion with or
without Speakers
Slide the headrest cover over the headrest
foam ensuring the contoured section of foam
is at the top of the cover and the flat section
of foam is at the bottom of the cover. Zip to
secure. Slide the flap of material at the rear
of the cover (with no zip) on to the bottom of
the wooden headrest assembly (a). Pull the 2
tabs across the top of the wooden headrest
and secure using poppers underneath (b).
To insert speakers (only if you have ordered
optional headrest with speakers) open the
zip at the rear of the headrest. Insert the
speakers into the 2 x pockets in the lining
of the headrest. Pull the speakers cable out
through the rear pocket to connect to your
device which can be stored in the top pocket
of the headrest cover.
A
B
8.2 Fitting the Back
Support Cushions
Insert the foam into the backrest cushion
ensuring the profile of the foam is in the
correct position. Zip to secure. Place the
backrest cushion into position and secure by
pulling the 4 tabs to the rear of the wooden
backrest and pressing on to poppers (a).
A