Leckey Comfee Seat User Instructions page 12

9.4 Seat Depth / Width
Fully tilt seat for ease of access. To adjust
the depth of the seat base, loosen the 2
knobs below the seat base at either side (a).
Use the grab handle on the wooden section
of the seat base and move into required
position (b). Tighten the 2 knobs to secure.
To width adjust the seat base, adjust the
armrest angle as described in section 9.3.
A
C
9.5 One Piece Backrest
To adjust the angle on the one piece
backrest, pull the trigger attached to the left
of the push handle. Whilst holding in the
trigger, adjust the backrest to the required
angle. Release the trigger to lock into
position.
B
9.6 Two Piece Backrest
To adjust the angle on the two piece
backrest, pull the trigger attached to the left
of the push handle (a). Whilst holding in the
trigger, adjust the backrest to the required
angle. Release the trigger to lock into
position.
To height adjust the two piece backrest,
loosen the soft touch knob at the bottom of
the top wooden section (b). Move backrest
to required height and tighten using the soft
touch knob.
Use the push handle to move the backrest
to the required height. Do not place hands
at the bottom of the backrest as fingers
may get trapped.
A
B