Leckey Comfee Seat User Instructions page 7

7.8 Attaching the Calf
Support Laterals
Remove calf support cushion for ease of
access. Locate the 2 holes on each side of
the wooden calf support (a). Align the calf
support lateral bracket with the holes at the
rear of the calf support. Thread bolt through
full assembly and use washer and nut to
secure (b).
A
7.9 Attaching the Padded
Footplate
For size 1 and 2, slide the centre footplate
bar into footplate receiver behind the calf
support to the required height. Tighten the
soft touch knob on the footplate receiver to
secure (a). For size 3, slide the 2 footplate
bars into the 2 footplate receivers behind the
calf support to the required height. Tighten
the soft touch knob on each footplate
receiver to secure.
B
7.10 Attaching the
Padded Footstraps
Unzip the padded footplate cover for ease of
use. For size 1 and size 2, thread the strap
through the slot in the cover and wooden
footplate (a). Align the popper on the wooden
foot plate to the strap and press to secure.
Thread strap up through the wooden foot
plate and cover (b). Secure and tighten
around the foot using the velcro strap.
Repeat process for second strap (c). For size
3, thread the strap through the required slot
in the cover, bracket and wooden footplate.
Thread strap up through the wooden foot
plate and cover. Secure and tighten around
the foot using the velcro strap. Repeat
process for second strap.
A
A
B
C