Leckey Comfee Seat User Instructions page 15

10.1 Transferring Into and
Out of the Comfee Seat
To prepare the seat for transfer, move the
4 point pelvic belt away from the seat base
area by tucking straps between rear of
armrest and the backrest cushion. To flip up
the footplate lift up and push towards the
calf support (a). The footplate will remain in
this position until pushed back down into
position.
A
10.2 Adjusting the 4 Point
Pelvic Harness
To open and close the 4 point pelvic harness,
use the central release buckle (a). Pull to
required position using the 2 adjustment
straps at the centre buckle for final fitting.
A
10.3 Tilt in Space
Locate the lever at the rear of the wooden
backrest at the top right (a). Pull to the right
and tilt the seat to the required position.
Release the lever to lock.
10.4 Tray
Before you insert the tray, make sure the tray
lock lever is unlocked (a). Align tray bars with
the two tray receivers. Push tray into required
position and secure by pulling the tray lock
lever at each side away from each tray bar
(b). To unlock the tray push the tray lock
levers away from the tray bars.
A
A B