Setting Options; Configuring Ctgs - HP StorageWorks XP24000 User Manual
Hitachi shadowimage for mainframe
Hide thumbs
Also See for StorageWorks XP24000:
- User manual (164 pages) ,
- Configuration manual (58 pages) ,
- Reference manual (456 pages)
Table of Contents
Advertisement
4.
Select the Change Reserve command in the menu.
The Reset Reserve Attribute dialog box opens.
Select only reserved and unpaired volumes to use the Change Reserve command.
5.
On the Reset Reserve Attribute dialog box, assure that the right volumes display, and then
click OK.
The setting will be reflected in the Preview List in the Pair Operation window.
6.
Click Apply in the Pair Operation window.
The settings are reflected in the storage system.
You can check whether the attribute setting is updated or not on the Display Filter dialog box.
Setting Options
The Option window (see
SIz operations.
To set options:
1.
Display the Option window.
If you are already displaying the other window shown by a tab, click the Option tab. For
information about how to display the Option window directly by starting Remote Web Console,
see
"Starting ShadowImage for Mainframe" (page
2.
Select the check box of the option you want to set.
For detailed information about options, see
If you do not want to set any option, clear all check boxes in the Select Option(s) box.
3.
Click Apply.
You can now perform SIz operations with the specified option.
Configuring CTGs
This section describes the instructions on setting or resetting the reserve attribute to a CTG. To check
the information for the pairs in the CTG before set the reserve attribute to the group, do the following
procedure:
1.
Display the CTG window (see
If you are already displaying the other window shown by a tab, click the CTG tab. For
information about how to display the CTG window directly by starting Remote Web Console,
see
"Starting ShadowImage for Mainframe" (page
2.
Select and right-click the CTG in the CTG List in the window.
The menu displays.
3.
Select the CT Group Status command in the menu.
The CT Group Status dialog box displays.
The information for the registered pairs displayed in the CT Group Status dialog box is only for
display and cannot be edited to perform any pair operation.
68
Performing ShadowImage for Mainframe Operations Using Remote Web Console
"Option Window" (page
"ShadowImage for Mainframe Options" (page
"CTG Window" (page
60)) allows you to specify the options to expand
51).
61)).
51).
25).
Advertisement
Table of Contents
