Setting Bc Options; Setting A Bc Option (Swap&Freeze Option); Bc Error Codes; Option Screen - HP StorageWorks XP10000 User Manual

Setting BC options

You can set the BC options by selecting and/or clearing the option check boxes on the Option screen. To
display the Option screen, click the Option tab on the BC main screen.
Figure 40

Option screen

The Select Option box displays check boxes for the BC options.
NOTE: More options will be supported in the future. See
information.
The Apply button applies the option settings in the Select Option box.
Setting a BC option (Swap&Freeze option)
1. In the BC main screen, click Option to display the Select Option box.
Select the option check box. If you do not want to set any option, clear all check boxes in the Select
Option box.
2. Click Apply. You can now perform a BC operation with the specified option.

BC error codes

BC displays error messages when error conditions occur during BC operations. The BC Error window
displays the BC error code and message. To display the Error window, select the failed volume in the
Preset Volume list on the BC main screen (Display tab), right-click, and select Detail. The following table
describes the BC error codes and provides instructions for resolving each error condition.
Table 25

BC error codes

Error Description
Code
0401 A locking time-out was detected during an internal
processing.
0402 A command (Paircreate, Pairsplit, or Reserve
Volume) could not be completed because it was
not in the SMPL status internally.
"BC options" on page 30 for further
Corrective Action
A retry may result in a normal termination. Retry
about five seconds later.
A retry may result in a normal termination. Retry
about five seconds later.
Business Copy XP user guide for the XP10000/XP12000 73