HP StorageWorks XP24000 User Manual page 82

Figure 35 Resynchronize Volume Pair Dialog Box
The Resynchronize Volume Pair dialog box consists of the following components.
Resynchronize Volume Pair Volume List
The Volume List located on the upper side of the Resynchronize Volume Pair dialog box displays
the following information pertaining to the S-VOL and T-VOL of the pair you want to
resynchronize:
◦ S-VOL: The LDKC:CU:LDEV of the S-VOL.
An LDEV number that ends with a pound or gate symbol (#) indicates that the LDEV is an
external volume (for example, 00:00:01#). For details regarding the external volumes,
see the HP StorageWorks XP24000/XP20000 External Storage Software User's Guide.
◦ Status: The pair status displays.
T-VOL: The LDKC:CU:LDEV of the T-VOL.
◦
An LDEV number that ends with a pound or gate symbol (#) indicates that the LDEV is an
external volume (for example, 00:00:01#). For details regarding the external volumes,
see the HP StorageWorks XP24000/XP20000 External Storage Software User's Guide.
Emulation: The emulation type of the S-VOL and T-VOL.
◦
Capacity(Cyl): The number of cylinders assigned to the volume.
◦
CLPR(S): The cache logical partition of the S-VOL.
◦
◦ CLPR(T): The cache logical partition of the T-VOL.
The Resync Type list allows you to select the resync type for the pairs being resynchronized
(from Normal Copy(S->T), Quick Resync(S->T), Reverse Copy(T->S), or Quick Restore(T->S)).
Before selecting Reverse Copy(T->S) or Quick Restore(T->S), make sure that the selected pair
meets the requirements listed in
82 Performing ShadowImage for Mainframe Operations Using Remote Web Console
Table 32 (page 83).