The Surface Of The Paper Is Dirty - Oce CS2436 User Manual

Troubleshooting (CS2436-11)
11. 5. 4.
Troubleshooting > Problems with the printing quality >

The surface of the paper is dirty

Cause
The Paper Retainer is
soiled.
You are using a paper
that does not dry easily.
Corrective Action
Clean the Paper Retainer.
(See "Cleaning Inside the Top Cover (10.4.2).")
In the Control Panel menu, set Roll
DryingTime to at least 1 min.
(See "Menu Settings (8.2.8).")
When paper that does not dry easily is used for
printing, it may curl during printing and touch
the Output Tray.
In this case, in the Control Panel menu, set
Scan Wait Time to an option other than Off.
However, note that printing will now take longer.
(See "Menu Settings (8.2.8).")