Oce CS2436 User Manual page 533

Printer Parts (CS2436-8)
ProcessingOption
GL2 Set Print
EOP Timer
TCP/IP
Interface
Setup
NetWare
AppleTalk
Ethernet Driver
AdjustFaintLines
Warning
PageSizeProcess1
PageSizeProcess2
IPv4 Mode
Protocol
IPv4
IPv4 Settings
IPv6 Support
IPv6 StlessAddrs
IPv6
DHCPv6
NetWare
Frame Type
Print Service
Auto Detect
If fine lines are printed in colors that
do not match the colors of other
shapes, selecting Off may help
produce the expected results.
However, lines in some colors may
appear broken.
Select On to have any GL2-related
warnings displayed.
Normally, the area available for
printing excludes a margin required by
the printer, and images are positioned
accordingly. Selecting On in this
setting eliminates any misalignment of
the printing position if the image itself
includes a border.
Selecting On will determine the paper
size based on the image rendering
area.
Print GL2 settings information.
Specify the timeout period before
cancellation of print jobs that cannot
be received by the printer.
Choose whether the printer IP address
is configured automatically or a static
IP address is entered manually.
DHCP
Specify the protocol used to configure
BOOTP
the IP address automatically.
RARP
IP
Specify the printer network
Address
information when using a static IP
Subnet address.
Mask Enter the IP address assigned to the
printer, as well as the network subnet
Default G/
mask and default gateway.
W
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless
address is used.
Specify whether DHCPv6 settings are
used.
Specify the NetWare protocol. To
apply your changes, choose Register
Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk
protocol. To apply your changes,
choose Register Setting.
Specify the communication method.
To apply your changes, choose
Register Setting.
Choose On for automatic
configuration of the LAN
communication protocol. Choose Off
to use settings values of Comm.
Mode and Ethernet Type.