CAS EC-II Series User Manual page 61

The default setting is 1/3 capacity.(Take 6kg scale for instance)
●
Put a weight on the pan same as what exactly shown in the
●
UNIT WEIGHT window, then press the ENTER key to confirm the
operation.
The displayed reading in the UNIT WEIGHT window starts blinking.
The scale will stop blinking and return to normal counting mode.
Calibration is now completed.
Note :
★ Press CLEAR key to escape from calibration mode at any time.
★ Change calibration value
After entering the third step, press MOVE key. Use numeric keys to input a
calibration value r(0.80000 ~ 1.20000). Press ENTER key to confirm, then
the calibration is finished.
※ r = Mass weight/Display weight
★ This calibration instruction is not for us matket.
62