Chimney Connection - Chesney's Wood Burning and Multi Fuel Stoves User's Installation Manual

Chimney Connection

1) Drop the liner through the outer casing and fix the flue
adaptor, then fit the flue collar to the adaptor bending the
adaptor lugs to secure the collar to the adaptor.
2) On the 8 series only there is an additional directional flue
collar that bolts to the inside of the outer casing. This will need
to be done at this stage.
Note: If connecting to an existing chimney you will need to make an
opening in the front face of the chimney breast above the outer casing to
make a compliant appropriate connection to the outer casing flue collar and
the existing flue.
3) Slide the fire cube back into the outer casing and fix in place
with two fixing bolts as previously illustrated.
4) Secure the flue collar inside the fire cube, ensuring a good
seal is achieved.
5) Replace all internal parts starting with the second baffle.
Hearth
The Apollo range must be installed on a full constructional hearth in
accordance with Building Regulations, Document J section 2 dia 26 & 27,
18