Installation - Chesney's Wood Burning and Multi Fuel Stoves User's Installation Manual

4. Installation

In all cases the installation must comply with current Building
Regulations, Local Authority Byelaws.
It should be noted that the Building Regulations requirements may be met
by adopting the relevant recommendations given in British Standards BS
8303, BS EN 15287-1:2010 as an alternative means to achieve an
equivalent level of performance to that obtained following the guidance
given in Approved Document J.
Therefore this appliance and installation must comply with the following
regulations:-
British Standards BS 8303. BS EN 15287-1:2010
Building Regulation Approved Document J for England and Wales
Building Regulations Part F for Scotland
Building Regulations/1997 Technical Guidance Approved
Document J-Heat Producing Appliances for the Republic of Ireland
Registered Body: HETAS (GB only) INFO (Ireland)
This appliance must be fitted by an approved installer or inspected and
signed off by a Building Control Officer. For a list of authorised installers
www.hetas.co.uk/nearest_member and follow the links or phone 0845 634
5626 and ask the HETAS team.
13