Smoke Control - Chesney's Wood Burning and Multi Fuel Stoves User's Installation Manual

6. Smoke Control

All Chesney's stoves are DEFRA exempt appliances that can be used
in Smoke Control Zones.
The "Smoke Tab" is fitted on the underside of the fire cube on the left hand
side and must be removed with the retaining bolt and discarded.
The Milan and Shoreditch stoves have heat shields under the stove that will
have to be removed by undoing the four hexagonal bolts to reveal the
"Smoke Tab". Always replace the heat shields.
Stove Operation in Smoke Control Zones
Make up fire as described page 28. Do not reduce the Air Flow Bar until the
kindling and logs are fully blackened, this may take 2-5 minutes (moisture
content and type of wood will dictate this) on lighting and on refuelling. You
must always refuel on a hot bed of ash. Do not over load the stove.
The quality of your fuel is of utmost importance.
Only burn HETAS approved wood logs and smokeless fuels (coals).
15