Body; Side Panel Removal; Front Cover Removal / Installation - Polaris 2008 sportsman 800efi Service Manual

Table of Contents

Advertisement

BODY / STEERING / SUSPENSION

BODY

Side Panel Removal

Side panel removal is quick and easy, use the following
instructions for removal and installation.
1.
Remove seat by releasing the latch (if equipped) and lifting
up on the seat. (X2 seats do not have a latch system.)
Step 1
2.
Grasp the rear of the side panel near the rear cab. With a
firm motion, pull the panel outward to disengage the side
panel from the grommet. Pull the panel downward and
rearward to remove it from the ATV.
Step 2
5.4
3.
Reinstall the side panel by reversing the removal procedure.
Step 3

Front Cover Removal / Installation

1.
Open the front storage compartment
2.
Pull up and outward on the front cover to remove the cover.
3.
To install the front cover, insert the tabs of the front cover
into the inserts of the cab. Make sure the tabs are aligned
with the slots. Then press the rear tabs into the slots.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2008 sportsman 800efi and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

2008 sportsman touring 800efi2008 sportsman z2 700efi

Table of Contents

Save PDF