Table of Contents
Advertisement
Charging
The supplied AC adapter's power plug is
compatible with AC 100 V to 240 V. For using
the terminal overseas, a plug adapter that fits
the electrical outlets in the country you stay is
needed. Do not use an electrical transformer
for overseas use to charge the terminal.
Use the supplied AC Adapter cable for
charging.
When charging starts, the notification LED
turns on in red/orange/green. Green means
the remaining battery level reaches 90% or
more. To check the battery level, tap
t
from the Home screen, then tap
u
[Settings]
[About phone]
check "Battery level". When charging is
completed, "100%" is displayed in the battery
level.
When you start charging the battery with the
terminal powered off, the power turns on.
However, you cannot operate the terminal.
Do not charge the battery in a place where
the use is prohibited such as in airplane or
hospital.
u
[Status] and
Do not charge the battery pack for a
long time (several days)
If you remain charging the terminal for a long
time, the power supply starts from the
internal battery after completion of charging.
The usage time duration may be short. In that
case, please charge it again correctly. For
recharging, remove the terminal from the AC
Adapter cable and reconnect it again.
Charging with the desktop
holder
For charging, attach the backside cover to the
terminal. For the backside cover, see "Part
names and functions" (P.29).
Insert the supplied microUSB
1
cable with the microUSB plug
engraved side facing up into the
connecting jack of the supplied
desktop holder ( ).
Insert the microUSB cable
2
horizontally with the USB plug
engraved side facing up into the
USB connecting jack of the
supplied AC Adapter, and insert
the AC Adapter plug to the power
outlet.
Before Using the Terminal
34
Advertisement
Table of Contents
