Table of Contents
Advertisement
Removing UIM
Open the UIM card slot cover, hook
1
your fingernail by the projection
part on the edge of the tray to pull
the tray straight out, and then
remove the UIM.
UIM
Tray
Push the tray straight to the end,
2
close the UIM card slot cover, and
then confirm there is no gap
between the body and cover.
microSD card
You can use microSD card for any other
compatible devices.
The terminal supports microSD card of up to
2GB, and microSDHC card of up to 32GB (As of
February, 2012).
For compatible microSD cards, contact
manufacturers of microSD cards.
Inserting microSD card
Open the microSD card slot cover,
1
check the orientation of microSD
card to insert it slowly straight into
the terminal until it clicks.
Insert the microSD card with metal
contacts side up.
"
Preparing SD card" appears on the
status bar to notify that reading or
writing from/onto microSD card
becomes enabled.
Before Using the Terminal
31
Advertisement
Table of Contents
