Table of Contents
Advertisement
UIM
The UIM is an IC card recorded user
information such as your phone number etc.
If the UIM is not inserted to the terminal, you
cannot use some functions (phone function,
etc.) of the terminal.
In this terminal, the UIM (blue) is not available.
If you have a UIM (blue), bring it to the nearest
docomo Shop to replace.
Do not use docomo mini UIM card attaching
with conversion adapter. Doing so may cause
malfunction.
When inserting/removing the UIM, make sure
to power off the terminal. Do not connect the
AC Adapter cable.
❖ Information
Please be careful not to touch or scratch a metal part
(IC) when you handle the UIM. Doing so may cause
malfunction or damage.
Security codes of the UIM
The UIM has a Security code, namely PIN. It
is set "0000" at the subscription. They can be
changed by yourself. (P.127)
Inserting UIM
Open the UIM card slot cover, hook
1
your fingernail by the projection
part ( ) on the edge of the tray to
pull the tray straight out, and then
insert it straight along with the
tray with metal part (IC) of the UIM
down.
Check the orientation of UIM corner
cut.
UIM
Corner cut
Push the tray straight to the end,
2
close the UIM card slot cover, and
then confirm there is no gap
between the body and cover ( ).
Before Using the Terminal
Tray
30
Advertisement
Table of Contents
