Table of Contents
Advertisement
Tap [USB tethering].
4
Confirm details of the cautions
5
displayed, tap [OK].
[USB tethering] is marked.
❖ Information
System requirements (OS) for USB tethering are as
follows. A required driver is automatically installed.
- Microsoft Windows 7
- Microsoft Windows Vista
- Microsoft Windows XP
Setting up a portable Wi-Fi hotspot
You can use the terminal as a Wi-Fi access
point to connect up to 8 wireless LAN devices
to the Internet simultaneously.
From the Settings screen (P.107),
1
tap [Wireless &
u
networks]
Tap [Port. Wi-Fi hotspot settings].
2
Tap [Configure Wi-Fi spot].
3
Enter [Network SSID] of the Wi-Fi
4
hotspot to set.
By default, "Xperia acro HD SO-
03D_XXXX" is set.
Tap [Security] field and mark the
5
radio button for the security type
of Wi-Fi hotspot to set.
Either "WPA2 PSK" or "Open" appears.
[Tethering].
Enter security information of the
6
Wi-Fi hotspot to set as required.
Tap [Save].
7
❖ Information
By default, the password is set at random. You can
change the password as desired.
Setting Wi-Fi tethering
From the Settings screen (P.107),
1
tap [Wireless &
u
networks]
Tap [Portable Wi-Fi hotspot].
2
Confirm details of the cautions
3
displayed, tap [OK].
[Portable Wi-Fi hotspot] is marked.
❖ Information
If USB tethering starts while connecting to Wi-Fi
network, Wi-Fi network is disconnected and
automatically connected when Wi-Fi tethering ends.
Alternatively, when the terminal and DLNA device
are connected via Wi-Fi network, starting/ending Wi-
Fi tethering affects Wi-Fi connection.
USB tethering and Wi-Fi tethering can be used at the
same time.
[Tethering].
Settings
117
Advertisement
Table of Contents
