Site Survey - Honeywell DCCC6500 Quick Start Manual

Dc charge controller for honeywell wind turbine model wt6500

Hide thumbs Also See for DCCC6500:

Table of Contents

Site Survey

Evaluation and Installation List

Quick Start: DC Charge Controller for Honeywell Wind Turbine WT6500 - Rev 2.0 - 29Nov11

Refer to the Site Survey Guide.

Permits

Permit#_________________________ Date_____________

Site Evaluation

Distance from Turbine to DC Charge Controller (max 200 ft. (60 m))______

Height to center of turbine______________________________

Draw all obstructions on site map

Draw Site Map

(View from above - use space on page 6 for your drawing)

Prevailing wind direction

Location of:

Obstacles

Turbine

DC Charge Controller

Battery Enclosure (max 6 ft. (1.8 m) from DC Charge Controller)

Mounting Hardware

see Honeywell Wind Turbine WT6500 Owner's Manual for more details)

Pole: Height____________ Material_______________ with Pole Top Mount (refer

to pages 8- 9)

Flat roof: Ballast Mount (refer to page 10)

Pitched roof: ROOFBOX with Extended QUADPOD Mount (refer to page 11)

Accessories

(Supplied by Installer)

(4) Batteries: 12 V, 100 Ah, deep cycle batteries - Type may be AGM or marine-

grade flooded

Battery enclosure

(1) 30 Amp fuse (refer to page 15)

(1) 15 Amp fused disconnect (refer to page 15)

(1) Battery switch (refer to page 15)

(Choose one or have your local PE design a custom mount -

Quick Start

Table of Contents