Safety Icons; Important Safety Instructions - Honeywell DCCC6500 Quick Start Manual

2
Safety Instructions
PLEASE READ THIS QUICK START GUIDE AND THE ENTIRE MANUAL PRIOR TO INSTALLATION. INSTALLATION
OF THIS WIND TURBINE CAN ONLY BE PERFORMED BY A WINDTRONICS AUTHORIZED INSTALLER OR OTHER
LICENSED CONTRACTOR.

Safety Icons

Important Safety Instructions

Quick Start: DC Charge Controller for Honeywell Wind Turbine WT6500 - Rev 2.0 - 29Nov11
The following symbols identify dangers associated with the installation, use or ownership of
the Honeywell Wind Turbine. When you see the symbols be aware of the protocol for personal
injury or property damage.
IMPORTANT: PLEASE TAKE NOTE
PROFESSIONAL INSTALLATION: REQUIRED
TIP: HELPFUL INFORMATION TO EASE THE INSTALLATION
1. This Quick Start Guide contains important instructions for the Honeywell Wind Turbine
installation and maintenance. Please save it.
2. Read the entire Quick Start Guide prior to installation and follow all warnings and cautions
included in the Quick Start Guide and/or attached to the Honeywell Wind Turbine.
3. Improper installation, adjustment, alteration, service maintenance or use can cause fire,
electrical shock or other conditions which may cause death, personal injury or property
damage.
4. Choose a calm day with very little wind for the installation.
5. Follow the installation procedures contained within this Quick Start Guide and all safety
codes. Follow your National Electric Code (NEC) and your local building and zoning codes.
6. The Honeywell Wind Turbine can only be moved and lifted by WindTronics Authorized
Installers or other licensed contractors using standard hoists and hydraulic lifts such as a
crane and bucket truck.
WARNING indicates a hazard that could result in death,
personal injury or property damage.
CAUTION indicates a hazard that could result in property
damage.
Quick Start