Wiring and Cables You May Need
The following wiring and cables are used with this product, which uses standard
interface connectors:
❑
Standard connectors: An 8-pin modular (similar to RJ48C) or 6-pin modular
(similar to RJ11) wall jack for the DSL network connection.
❑
DSL wiring: Unshielded twisted-pair wiring (CAT3, or better). The CAT3 wiring must
meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or 26 AWG (.4 mm).
❑
Ethernet wiring: Shielded twisted-pair wiring (CAT5, or better). The CAT5
wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or
26 AWG (.4 mm).
Contact your sales representative to order Paradyne cables.
Interface
Connection
COM port to a PC
or asynchronous
terminal
ETHERNET port
to a NIC on a PC
or an Ethernet hub
NETwork to the
DSL wall jack
Cables
DB25-to-DB25:
Standard EIA-232 straight-through cable
DB25-to-DB9:
DB25-to-8-pin modular adapter
8-pin modular-to-DB9 cable
(14 feet – 4.3 m)
For connection to a PC NIC:
Standard Ethernet crossover cable
For connection to an Ethernet Hub:
Standard Ethernet straight-through cable
Standard straight-through DSL network cable
with 8-pin modular connectors – similar to an
RJ48C-toRJ48C cable (20 feet – 6.1 m).
Cable supplied for use in the U.S.
Standard DSL network cable with
6-pin connectors – similar to an RJ11 cable
5
Feature
Number
—
3100-F1-920
3100-F2-550
—
—
3100-F1-500
—