Preparation
Make sure you have:
❑
A dedicated, grounded power outlet that is protected by a circuit breaker within
6 feet of the FrameSaver unit
❑
A clean, well-lit, and ventilated site that is free from environmental extremes
❑
One-to-two feet of clearance for cable connections
❑
A physical connection to the frame relay DDS network
❑
An asynchronous terminal or PC (personal computer)
❑
If desired, an operable Ethernet LAN (Local Area Network) connection for access
by an NMS (Network Management System)
❑
Configuration information for the FrameSaver unit being installed or replaced
❑
Appropriate cables:
— Ethernet cable
— Data port cable
— COM port-to-terminal or COM port-to-PC cable
See the FrameSaver SLV Technical Description (9000-A2-GB30) for additional
information about technical specification, connectors, cables, and pin assignments. See
the FrameSaver SLV Operations Guide (9000-A2-GB33) for information about
troubleshooting.
Cables You May Need to Order
If connecting to . . .
Asynchronous
terminal or PC with an
8-pin modular
interface/connector
PC with a D-Sub9
interface/connector
External device
(such as a modem)
Contact your sales representative to order cables.
Order a . . .
Standard EIA-232
straight-through cable,
8-pin modular-to-DB25
(14 feet – 4.3 meters)
Standard EIA-232
straight-through cable,
D-Sub9-to-DB25
(14 feet – 4.3 meters)
Standard EIA-232-D
crossover cable
(14 feet – 4.3 meters)
Feature
Number
3100-F2-540
3100-F2-550
9008-F1-550
3
Part Number
035-0314-1431
035-0313-1431
035-0336-1431