Preparation
Make sure you have:
❑
A dedicated, grounded power outlet that is protected by a circuit breaker within
6 feet of the FrameSaver unit
❑
A clean, well-lit, and ventilated site that is free from environmental extremes
❑
One to two feet of clearance for cable connections
❑
A physical connection to the frame relay T1 network
❑
An asynchronous terminal or PC (personal computer)
❑
If desired, an operable Ethernet LAN (Local Area Network) connection for access
by an NMS (Network Management System)
❑
Configuration information for the FrameSaver unit being installed or replaced
❑
Appropriate cables (see
For additional information, see the
(9000-A2-GB30)
.
Cables You May Need to Order
If connecting to . . .
T1 line interface/
connector
For use in Canada.
Asynchronous
terminal or PC with an
8-pin modular
interface/connector
PC with a D-Sub9
interface/connector
External device
(such as a modem)
Contact your sales representative to order cables.
Cables You May Need to Order
FrameSaver SLV Technical Description
Order a . . .
T1 line interface cable,
RJ48C-to-CA81A
(20 feet / 6.1 meters)
Standard EIA-232
straight-through cable,
8-pin modular-to-DB25
(14 feet / 4.3 meters)
Standard EIA-232
straight-through cable,
D-Sub9-to-DB25
(14 feet / 4.3 meters)
Standard EIA-232-D
crossover cable
(14 feet / 4.3 meters)
, below)
Feature
Number
3100-F1-510
3100-F2-540
3100-F2-550
9008-F1-550
3
Part Number
035-0221-2031
035-0314-1431
035-0313-1431
035-0336-1431