Razberi DV200 User Manual page 48

In the Motion Detection setting page, there is a frame (Motion Detection
Window) displayed on the Live Video Pane as the figure below. The Motion
Detection Window is for defining the motion detection area. To change the size
of the Motion Detection Window, move the mouse cursor to the edge of the
frame and draw it outward/inward. Moving the mouse to the center of the frame
can shift the frame to the intended location.
Up 10 Motion Detection Windows can be set. Click on the <add> button under
the Live Video Pane to add a Motion Detection Window. To cancel a Motion
Detection Window, move the mouse cursor to the selected Window, and click on
the <delete> button.
If Motion Detection function is activated, the pop-off window (Motion) with
indication of motion will be shown.
When motion is detected, the signals will be displayed on the Motion window as
shown below.
47
razberi technologies™